FAPlite Citroen/Peugeot OBD2 1.59 [free]

- Only for Peugeot and Citroen vehicles
- Please note that this application will not work with bad ELM327 clone adapters which doesn't support extended protocol commands
- Supported INJ ECUs: EDC15C2, EDC17C10, EDC17C10_BR2, DCM3.5, DCM3.5_BR2, HDI_SID803, EDC16CP39, DCM3.4, HDI_SID807_BR2, MED17.4.2, MM6LPB, MEV17.4_EURO4, DCM3.4P,
HDI_SID807, MEV17.4_EURO5, MEV17.4.2, ME745, MED17_4_EURO5, SID201, DCM35_HY, J34P, MM6LP, ME749, MM6KP, EDC17CP42, EDC17CP11, MED17_4_EURO4, V46, DCM6.2, ME747, DCN2,
V34.1, V46.21, EDC17C60, MED17.4.4, S2000PM2
- Supported gearbox ECUS: CFC300P, CFC300P_HY, AM6/AT6, AL6
- ELM327 Bluetooth or WiFi adapter required
- Read real time information from your Engine Management ECU
- All sensors displayed like in DiagBox/Lexia manufacturer diagnostic (FAPlite version supports less parameters)
- Now you can check condition of used car before buying
- Faults reading and clearing
- Fast logging of sensors data and displaying in chart or table
- Testing of actioners like engine fan (in full version you get many more: EGR, fuel pump, air mixer, injectors...)
- Customizable display of sensors data
- Check condition of DPF/FAP and additive level

• 09/09/2019: FAPlite Citroen/Peugeot OBD2 1.59
• 11/26/2018: FAPlite Citroen/Peugeot OBD2 1.53
• 10/09/2018: FAPlite Citroen/Peugeot OBD2 1.51
• 07/04/2018: FAPlite Citroen/Peugeot OBD2 1.46
• 06/17/2018: FAPlite Citroen/Peugeot OBD2 1.45
• 06/02/2018: FAPlite Citroen/Peugeot OBD2 1.44
• 05/21/2018: FAPlite Citroen/Peugeot OBD2 1.43
• 02/03/2018: FAPlite Citroen/Peugeot OBD2 1.40
• 01/29/2018: FAPlite Citroen/Peugeot OBD2 1.39
• Report a new version